New right bottom skin received.
Continue reading “New bottom skin right wing”
Step ribs right wing
I received the replacement step rib #4 so I could continue with the step ribs of the right wing.
Continue reading “Step ribs right wing”
Aero 2019
Time for the yearly Aero in Friedrichshafen, it’s THE event for general aviation in Europe.
Continue reading “Aero 2019”
Fuel sender float arms
Bend the fuel sender arms and mounted them.
Continue reading “Fuel sender float arms”
Fuel pickup and return fittings
I received the new fuel tank hardware to start on the fuel pickup and return fittings again.
Continue reading “Fuel pickup and return fittings”
Redo inside breather lines
As mentioned in the previous post I was unsure about applying Loctite 577 to the thread of the flared fittings. After some more research it’s obvious that no sealant is required so I decided to remove the inside breather lines and to redo them. One other reason to redo them is that the flares on the inside breather lines were not formed nicely.
Continue reading “Redo inside breather lines”
Sealing fuel tank fittings
Mixed a 2 oz Semco cartridge with tank sealant for the tank fittings.
Continue reading “Sealing fuel tank fittings”
Prepare tank fittings
Preparing the tank fittings so everything is scuffed and de-greased before the sealant can be applied.
Continue reading “Prepare tank fittings”
Fuel senders
Working on the fuel senders.
Continue reading “Fuel senders”
Fuel breather lines continued
I continued with bending the other breather line and installed them and started working on the fuel sender units.
Continue reading “Fuel breather lines continued”