Past weeks I continued to work on the right wingtip to make sure both tip are symmetrical.
Continue reading “Wingtips fiberglass – 6”
Wingtips fiberglass – 5
The wingtips should be mounted symmetrical to avoid a heavy wing. Unfortunately both wing tips are not the same size which needed to be corrected.
Continue reading “Wingtips fiberglass – 5”
Wingtips fiberglass – 4
More fiberglass work, it takes quite some time because the resin has to cure for 24 hours. So this work has been done during the past couple of days.
Continue reading “Wingtips fiberglass – 4”
Wingtips fiberglass – 3
Because the bottom didn’t had a nice transition between the fiberglass tip and the wing skin anymore I had to fix that.
Continue reading “Wingtips fiberglass – 3”
Wingtips fiberglass – 2
The height of the wing tip was no the same as the height of the wing so I had to adjust the wing tip.
Continue reading “Wingtips fiberglass – 2”
Wingtips fiberglass – 1
The left wing tip didn’t fit perfect so some adjustments were needed.
Continue reading “Wingtips fiberglass – 1”
Starting on the wing tips
In other blogs I’ve seen that the wing tips need some modification to fit nicely, so I was curious how mine would fit.
Continue reading “Starting on the wing tips”
Rivet ribs 11
Last time the alignment of rib 11, skin 8, ailerons and flaps looked good. Next is riveting rib 11.
Continue reading “Rivet ribs 11”
Right wing alignment of wing tip skins
Now that rib 11 and skin 8 are in on both wings it’s time to add the right flap and aileron and compare the alignments of both wings.
Continue reading “Right wing alignment of wing tip skins”
Test fit rib 11 right wing
After the primer was dry it was time to test fit rib 11 on the right wing.
Continue reading “Test fit rib 11 right wing”