The primer was dry so it’s time to spray the dark gray color.
Continue reading “Paint floor 2”
Category: Paint
Paint floor 1
Before spraying the dark gray color on the floor a layer of primer was required.
Continue reading “Paint floor 1”
Test interior paint
Before finishing the rudder pedals it’s better to paint the floor. When the pedals with bushing are in it will be difficult to mask that area.
Continue reading “Test interior paint”
Rivet filling with SuperFil
It took a while before I received the SuperFil from a vendor in the UK due Corona and Brexit.
Continue reading “Rivet filling with SuperFil”
Filling 3.2 mm rivets left wing
After filling the 4 mm rivets on the top side of both wings I continued with the 3.2 mm rivets of the left wing.
Continue reading “Filling 3.2 mm rivets left wing”
Rivet head sanding
After the resin with micro was cured it was time to sand the filler away.
Continue reading “Rivet head sanding”
Rivet head filling
While working on the wingtips the wings are in a perfect position to fill the top rivet heads.
Continue reading “Rivet head filling”