Unfortunately the outside CF skins have quite some corrosion which needed to be resolved.
The left skin has quite some corrosion on the inside and minor on the outside:
Left right skins is the opposite, minor on the inside and a lot more on the outside:
With medium grid on a sander I removed the corrosion, followed by 400 grit and Skotch Brite:
The affected regions were treated with Alodine:
And finally primed with 2K epoxy primer:
Some paint was left in the gun, sufficient for these 2 reinforcement plates:
Next is to remove the corrosion from the outside of both skins…