Hrs: 2

Soundproofing floor skins

Chances of fire between the floor is small so although the shipped soundproofing material is not super fireproof it’s fine to use there.

Cut the soundproofing material which is shipped with the kit to the correct size and fixated it to the top floor. And I applied some Ardrox between on the transponder antenna doubler:

For the bottom skin I used some leftovers from the super soundproofing material from Aircraft Spruce which has a better resistance against moisture. In case fuel from the fuel filters leaks or any water enters between the skin:

Next was aligning the top and bottom skin. Since rivets enforce a better fit I first put in some rivets and thereafter the cleco’s. I will hold off shooting the rivets until the floor section is joined with the mainspar and RF: