Hrs: 4

RF side skins

Some minor tweak were done to the RF side skin before they could be primed.

First I filed the cut-outs for the interfering rivets:

The right skin has a higher revision, so I decided to add the mods to the left skin as well, I used a simple paper template for that:

With the snips I removed the corner and with a very small round file I filed the notches:

Next edge rolling, very careful, this tool is dangerous, so easy to damage the skin:

Next sanding, cleaning with Acetone and shooting the primer:

And with a foam roller I applied some epoxy primer to the mating surfaces: