In the last month I encountered some issues with some part. Sling Aircraft combined the replacement parts in one shipment. Today the crate arrived.
Continue reading “Replacement parts received”
Month: May 2022
Design custom part for center console channel
Since I’m not going for the parachute option I don’t have the parachute box. The flanges of the center console skins remain unriveted which I don’t like. So I started to experiment a better solution.
Continue reading “Design custom part for center console channel”
Rivet brackets to main spar carry through
What was planned as an easy job became a longer story because it was not so easy to rivet the flap bracket to the main spar carry through.
Continue reading “Rivet brackets to main spar carry through”
Main spar work started
Priming and test fitting the several brackets and part to the main spar.
Continue reading “Main spar work started”
More work to front inside side skins and center console skins
Test fit, prime the front inside skins and rivet the stringers to the front inside side skins.
Continue reading “More work to front inside side skins and center console skins”
Rivet floor section
Some small fixes to the floor section were done and shooting rivets where possible.
Continue reading “Rivet floor section”
Forward floor assembly
After the primer cured I continued with the forward floor assembly.
Continue reading “Forward floor assembly”
Test fit and prepare floor parts
Test fit, deburr and prime the upper floor parts.
Continue reading “Test fit and prepare floor parts”
Prepare small CF parts
Yesterday and today multiple smaller parts were deburred and primed.
Continue reading “Prepare small CF parts”