Hrs: 3

RF – rear skins

Test fit of the rear skins.

It’s not clear which skin goes first, it’s not clearly defined in the manual, some extra investigation is required.
The rear cover skin goes first, but then it’s not clear if the right or the left rear skin goes first.

Especially in the tail quite some clecos need some manipulation to get in, so match-drilling will be required.

Just to be sure I populated almost every hole with a cleco:

Not all holes line up, the top holes in rib 6 don’t line up:

On the bottom it’s impossible to get a coper cleco in, after some manipulation a #40 cleco went in:

The rear cover skin has one hole on the left side that’s not in the outside skin and not on the right side: