Hrs: 10

Wingtips fiberglass – 3

Because the bottom didn’t had a nice transition between the fiberglass tip and the wing skin anymore I had to fix that.

I did a layer of 260 gram and a layer of 200 gram fiberglass on the outside, let it cure, smoothen the transition with filler (epoxy resin with glass bubbles), thereafter did another layer of 260 gram and a layer of 200 gram:

Curing in progress with the peel ply to cover it:

When the layers were dry I added some filler which will be sanded smoothly:

In between I removed the stiffening fiberglass flanges of the right wing tip: