Hrs: 2

Mount fuel sender plate right tank

I received the 4 mm fiber washers to mount the fuel sender plate on the right tank.

During a previous test fit of the fuel sender plate I broke a couple of fiber washers so I had to order new ones.
Since I used sealed rivnuts I had to use shorter bolts than the bolts included in the kit, I’m using stainless steel M4 x 12 mm.
Torque setting for the M4 bolts is 20 inch/lbs.

Only a little of fuel lube on all sides:

Numbered the bolts in which order they needed to be torqued:

Applied torque seal: