Hrs: 4

Prepare left tank for closing

Between the Christmas activities I could do some work on the left fuel tank.

I test fitted the tank, match drilled the remaining holes and de-greased all parts:

Next I needed to reset the rivnuts because they were spinning when torquing the M4 bolts.

I only needed a bit of Proseal, using a complete Semkit would be a waste. I got a tip from Peter V. to split the 2 parts and only use what is needed. I used a scale (0.1 gram precision) to mix 1:10 in weight:

Rivnuts set and checked if they can handle a torque of minimum 20 inch/pound: