Before closing the fuel tank I did an test fit, unfortunately there is some misalignment.
The marked holes are off by about 2 mm:
When measuring the centre-to-centre distance and compare the right and left spar and skin it’s clear. The skins are okay but the holes in the spar are off.
Current situation:
- left wing top: off by 2 mm
- left wing bottom: ok
- right wing top: ok
- right wing bottom: off by 1.4 mm
Misalignment left wing top side:
Right wing is a bit better:
It’s quite frustrating when parts are prepared carefully which takes time and dedication and then they just don’t fit 🙁
I will work with the factory to find a solution; to be continued…
One thought on “Test fit fuel tank”
Comments are closed.