After all the brackets were dry I could start installing the conduit and wires.
The 16 mm conduit from the root to the inspection panel:
The new bracket where the 16 mm conduit transitions to 13 mm:
The 13 mm conduit ends near the landing and taxi lights, from there a 10 mm conduit goes to the wing tip.
Note another new bracket in rib 9 with a cable tie and I enlarged the existing 9.5 mm hole in rib 10 to 12 mm for the larger grommet.
Landing/taxi light area where the navigation light wire continues via the 10 mm conduit to the wing tip:
