There was a dent in the main spar which needed to be smoothen out.
Continue reading “Main spar fix”
Month: February 2018
Rear spar extension fix
The holes of the 2 brackets for the rear spar extension didn’t line up, especially the holes where the rivets of the skins later go through.
Continue reading “Rear spar extension fix”
Rivet rear spars
The epoxy primer needs more time to dry, so I had to wait 1 day before I could start riveting the parts together.
Continue reading “Rivet rear spars”
Changed the paint booth filters
After 16 months it was time to change the paint booth filters.
Continue reading “Changed the paint booth filters”
Deburring and priming of rear spar parts
Finding together the required rear spar parts, spars and channels and deburred and primed them.
Continue reading “Deburring and priming of rear spar parts”
Wing jigs
Assembly of the wing jigs.
Continue reading “Wing jigs”
Replacement trim tab brackets
I forgot to order the 2 brackets that connect the trim servo with the trim tab, the brackets were shipped with the other replacement parts so I could prep and rivet them.
Continue reading “Replacement trim tab brackets”
Replacement flap nose rib 3 left
I received a new flap nose rib 3.
Continue reading “Replacement flap nose rib 3 left”
Primer / corrosion experiment [after 3 months]
Update on the primer and corrosion experiment.
Continue reading “Primer / corrosion experiment [after 3 months]”